Manual Decoiler K Span Cold Roll Forming Machine with 15 m / min Straight Speed manufacturer from China RISHBIN WUXI CO., LTD

Place of Origin:

Zhejiang, China (Mainland)

Product Detail

Manual Decoiler K Span Cold Roll Forming Machine w

Manual Decoiler K Span Cold Roll Forming Machine with 15 m / min Straight Speed

Main techniacal parameter

Item	Description
Total Weight	About 23000KG
Size	9000mm × 2250mm × 2300mm
Main Motor Power	39KW
Forming power	15kw
Bending power	10kw
Conical power	4.0kw
Working Speed	Straight sheet: 15m/min
	Arch sheet: 13m/min
	Sewing: 6m/min
Material of roller shafts	45# steel, quenched HRC 58-62
Dia of shaft	90mm
Material of cutting blade	Cr12 steel
Step of rollers	14 steps
Feeding Width	914mm
Effective Width	610mm
Thickness of the coil	0.6-2.5mm
Gear/Spoket driving	14 stations to form
Ship Container	40HC x 1
Proper span	≤40m
Operating factor of the panel	66%
Bending leaf	30mm stainless
Side frame thickness	35mm

Introduction of machine

The power set to automatically transport the colored steel sheet is equipped in the forming press section which can press the colored steel sheet with the thickness of 0.6-1.6. It is not needed to frequently adjust the clearance between the pressing rolls when pressing the sheet with different thickness which can make the sheet come out from machine is very simple. But the quality of the finished product can be guaranteed.
All the rollers are forged form the high quality structural steel and are processed intensely. The surfaces of the rollers are plated with hard chromium. The rollers have a high hardness and long operating life.
The length of the finished sheet is measured by the electronic measurement instrument or mechanical measurement instrument .The helping hand wheel and the counter are used in the adjustment of the bending of arch sheet ,which makes the operation simple and guarantees the quality and the dimensional precision.

Main component

NO.

Name